29
MS 191 T
English / USA
:
Set the choke lever
(5)
to:
for cold start
l
for warm start
j
(also use this position if engine has
been running but is still cold)
:
Place your saw on solid ground.
:
Make sure you have a firm footing –
check that chain is not touching any
object or the ground.
Bystanders must be well clear of the
general work area of the saw.
:
Hold the saw firmly on the ground
with your right hand on the top
handle and your right knee resting
on the filter cover.
:
Pull the starter grip slowly with your
left hand until you feel it engage –
then give the grip a brisk strong pull
and push down the top handle at the
same time.
:
Do not pull out the starter rope to its
full length – it might otherwise
break.
:
Do not let the starter grip snap back
– guide it back slowly and vertically
so that the starter rope can rewind
properly.
If the engine is new, pull the starter
several times to prime the fuel system.
5
170BA013 KN
1
70BA014 KN
1
70BA014 KN
Summary of Contents for MS 191 T
Page 53: ...52 English USA MS 191 T...
Page 105: ...104 espa ol EE UU MS 191 T...
