HT-KM
English
16
emergency. To avoid damage, do not
throw the machine to the ground when
practicing.
Starting the Engine
Always follow the operating instructions
for the KombiEngine and basic power
tool.
N
Remove the chain guard.
Check that the chain is not touching the
ground or any other obstacles.
N
Position the unit securely for
starting: Put the powerhead on the
ground so that it rests on the engine
support. Rest the hook on the
cutting attachment on a raised
support, e.g. a mound or branch.
N
Make sure you have a firm footing,
either standing, stooping or
kneeling.
N
Hold the machine with you left hand
and press it down firmly – do not
touch the controls on the control
handle – see KombiEngine or basic
power tool instruction manual.
NOTICE
Do not stand or kneel on the drive tube.
Alternative method of starting
N
Hang the cutting attachment on a
branch so that it is held by the hook.
N
Make sure you have a safe and
secure footing.
N
Hold the machine with you left hand
and press it down firmly – do not
touch the controls on the control
handle – see KombiEngine or basic
power tool instruction manual.
WARNING
The saw chain may begin to run as soon
as the engine starts. For this reason, blip
the throttle after starting – the engine
returns to idling speed.
The starting procedure is now as
described in the instruction manual of
the KombiEngine or basic power tool
you are using.
Stopping the Engine
N
See KombiEngine or basic power
tool instruction manual.
Starting / Stopping the
Engine
402BA039 KN
402BA040 KN
Summary of Contents for KombiTool HT-KM 4182
Page 1: ...STIHL HT KM Instruction Manual...
Page 2: ......
Page 31: ......
Page 32: ...www stihl com 04584730121C 0458 473 0121 C 0458 473 0121 C englisch G...