Stihl HS 82, Instruction Manual

Page: 24 / 76

HS 82 R, HS 82 T
English
22
WARNING
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press spark plug boot (1)
snugly onto spark plug terminal (2) of the
proper size. (Note: If terminal has
detachable SAE adapter nut, it must be
securely attached.) A loose connection
between spark plug boot and ignition
wire connector in the boot may create
arcing that could ignite combustible
fumes and cause a fire.
Installing the spark plug
N
Fit the spark plug by hand and
screw it in
N
Tighten spark plug with combination
wrench
N
Press the spark plug boot firmly
onto the spark plug
Use STIHL gear lubricant for hedge
trimmers (special accessory) to lubricate
the blade drive gear.
After about 25 hours of operation:
N
Remove the screw plug (1) from the
gear housing on the underside of
the unit.
N
Screw the tube of grease (2) into the
filler hole.
N
Squeeze up to 1/4 oz (5 g) grease
into the gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
N
Remove the tube of grease (2).
N
Refit the filler plug and tighten it
down firmly.
1
2
000BA071 KN
Lubricating the Gearbox