19.2
Replacing clutch drum
6
1
5
3 2
4
241
1BA042 KN
► Remove cap (1)
► Remove rim sprocket (4)
► Use a screwdriver to remove the E-clip (2)
► Remove washer (3)
► Remove clutch drum (5) with needle cage (6)
from the crankshaft
19.3
Installing the clutch drum
► Clean crankshaft stub and needle cage and
lubricate with STIHL lubricant (special acces‐
sory)
► Slip the needle cage onto the crankshaft stub.
► Fit clutch drum
► Fit rim sprocket
► Refit washer and E-clip on the crankshaft
► Fit cap
20 Maintain and Sharpen Dia‐
mond Abrasive Chain
20.1
Maintaining the diamond abra‐
sive chain
After finishing work:
► Remove diamond abrasive chain and guide
bar
► Rinse diamond abrasive chain and guide bar
with water
► Dry diamond abrasive chain and guide bar
► Spray diamond abrasive chain and guide bar
with STIHL multispray – in particular the bear‐
ing of the sprocket nose – corrosion protection
20.2
Check diamond abrasive chain
regularly
► Check the diamond abrasive chain for cracks
and damaged rivets
► Replace damaged or worn chain components
– contact a servicing dealer
Never use a dull or damaged diamond abrasive
chain – this leads to increased physical strain,
increased vibration load, unsatisfactory results
and increased wear.
If cutting performance begins to deteriorate,
check the sharpness of the diamond abrasive
chain, resharpen as needed. To do this, briefly
cut through abrasive material, e. g., sandstone,
aerated concrete or asphalt.
21 Maintenance and Care
The following maintenance intervals apply for normal operat‐
ing conditions only. The specified intervals must be shortened
accordingly when working for longer than normal or under dif‐
ficult cutting conditions (extensive dust, etc.).
Before starting work
At the end of work and/or daily
Whenever tank is refilled
Weekly
Monthly
Annually
If faulty
If damaged
As required
Complete machine
Visual inspection (condition,
leaks)
X
X
1)
STIHL recommends STIHL servicing dealer
2)
During initial use, tighten the cylinder block screws after 10 to 20 hours of operation
3)
When diamond abrasive chain is mounted or changed
20 Maintain and Sharpen Diamond Abrasive Chain
English
0458-761-0121-B
23
Summary of Contents for GS 461
