Stihl FW 20 TS 410, Instruction Manual, Page: 8 / 108

FW 20 - TS 410, TS 420, TS 500i
English
6
A basic machine and an attachment kit
are combined to produce a complete
cart FW 20.
The complete instruction manual for the
cart FW 20 therefore consists of two
instruction manuals – one for the basic
machine FW 20 and one for the
attachment kit FW
-
TS.
Always read both instruction manuals
carefully before using your machine for
the first time and keep them safe for
future reference.
Additionally, observe the instruction
manual of the cut-off machine used.
Installing the mount
N
Raise the tube (1) to the up position
N
Insert screws (2) M8x25 from above
through the oblong holes in the
mount (3)
N
Position the mount (3) so that the
notch (4) in the upper oblong hole is
centered in relation to the screw
N
Screw on and tighten the hexagon
nuts with washers
Mounting the cut-off machine
N
Position the cut-off machine so that
the pins (1) protrude into the holes
in the support (2)
Aligning the clamping plate to the guard
Outer mounting of the guard
N
Mount the clamping element in
position A
Inner mounting of the guard
N
Mount the clamping element in
position B
Cut-off machine cart
379BA049 KN
+
+
.....
Mounting
2
1
379BA048 KN
1
2
2
1
539BA002 KN
539BA003 KN
A B