Stihl FS 310, Instruction Manual

Page: 21 / 108

FS 310
English
19
N
Hold the lower clamp (1) steady.
N
Unscrew and remove the clamping
screw (2). The clamps are loose
once the clamping screw has been
removed.
N
Remove the upper clamp (3) from
the lower clamp.
N
Place the handlebar (4) in the lower
clamp (1) so that distance A is no
more than 6 in (15 cm).
N
Place the upper clamp in position
and press it down.
N
Insert the clamping screw.
N
Line up the handlebar at a right
angle to the drive tube.
N
Tighten down the clamping screw
firmly.
N
Take out the screw (5), the nut (6)
remains in the control handle (7).
N
Push the control handle onto the
end of the handlebar (4) until the
holes (9) line up – the throttle
trigger (8) must point towards the
gearbox.
N
Insert the screw and tighten it down
firmly.
N
Go to "Adjusting the Throttle Cable".
Transport and storage position: Loosen
the clamping screw, turn the handlebar
in line with the drive tube and fold the
handles down.
Mounting the Bike Handle
3
1
2
256BA001 KN
A
4
1
256BA002 KN
9
5
7
8
4
9
002BA256 KN
6
7