84
FS 240 C, FS 260 C, FS 360 C, FS 410 C, FS 460 C-M
:
Push the torsion spring (1) into
the mount (2) as far as it will go
The bent end (arrow) must rest
against the peg (3).
:
Push slide (1) into the mount so
that engages the middle of the
serration (arrow)
:
Position handle molding (1),
insert and tighten down the
screws (arrows)
Checking operation
– Check throttle cable setting,
4902RA125 TG
1
2
3
4902RA126 TG
1
5904RA262 TG
1
10.1.2 Slide control
– Remove control handle for loop
handle,
– Remove throttle trigger / throttle
trigger interlock,
:
Remove slide control (1)
:
Remove torsion spring (1)
Installation
:
Slide torsion spring (1) onto the
post (2) so that the angled
end (arrow) faces upward
5904RA291 TG
1
5904RA292 TG
1
5904RA293 TG
1
2
:
Short end (1) must lie between
the ridges (arrows)
:
Orient slide control (1) so that the
cam (arrow) faces downward
:
Position slide control (1) so that
the cam (2) is seated to the left of
the contact spring (3)
5904RA294 TG
1
5904RA295 TG
1
5904RA296 TG
1
3
2