![background image](http://html1.mh-extra.com/html/stihl/fg-1/fg-1_manual_1379543009.webp)
20
english
FG 1
:
Turn the acorn nut
(2)
slowly
clockwise until the distance
between it and the stop bar
(6)
is
about 0.1 to 0.2 mm.
Sharpen the master cutter with 2 to 3
firm strokes of the file, from the inside to
the outside of the side plate.
:
The stop bar
(1)
should now locate
against the acorn nut
(2)
.
If this is not the case, readjust the
acorn nut so that the stop bar butts
against it.
Use the setting for the master cutter to
sharpen all the other cutters in the row.
During the sharpening process make
sure the stop
(3)
always locates properly
against the back of the cutter being
sharpened.
Sharpening second row of
cutters
:
Swing the filing frame upwards and
loosen the knurled nut
(1)
.
6
6
2
2
565BA021 KN
Sharpening
1
1
2
2
565BA010 KN
3
565BA012 KN
1
565BA023 KN
Downloaded from
search engine