Stihl FCS-KM, Instruction Manual, Page: 12 / 24

FCS-KM
English
10
N
Line up the gearbox (2) on the drive
tube (3) so that the lug (arrow)
points vertically upwards when the
depth wheel (4) is vertical.
N
Tighten down the clamp screw (1)
firmly.
N
Push the lug (1) on the drive tube
into the slot (2) in the coupling
sleeve as far as stop.
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
N
Tighten down the star knob (4)
firmly.
Removing the KombiTool
N
Reverse the above sequence to
remove the drive tube.
N
Lay the power edger on its back so
that the blade mounting (1) faces
up.
N
Insert the stop pin (2) into the
hole (3) as far as stop – apply slight
pressure and turn back and forth
1
2
257BA012 KN
3
4
Mounting the KombiTool
1
002BA326 KN
2
3
002BA327 KN
4
Mounting the Cutting Blade
257BA013 KN
4
3
6
2
257BA014 KN
5