13
FC-MM
English
:
With your left hand on the loop
handle, press the unit
firmly
against
the ground.
Do not stand or kneel on the
handlebar or frame.
The starting procedure is now as
described in the MultiEngine instruction
manual.
To shut down the engine
:
Push slide control in direction of
arrow (
h
) to
STOP
–
$
.
Observing the instructions in this manual
and the MultiEngine manual helps
reduce the risk of unnecessary wear and
damage to the power tool.
The power tool must be operated,
maintained and stored with the due care
and attention described in these
instruction manuals.
The user is responsible for all damage
caused by non-observance of the safety
precautions, operating and maintenance
instructions. This includes in particular:
–
Alterations or modifications to the
product not approved by STIHL.
–
Using attachments or tools not
approved by STIHL.
–
Using the product for purposes for
which it was not designed.
–
Using the product for sports or
competitive events.
–
Consequential damage caused by
continuing to use the product with
defective components.
Maintenance Work
All maintenance operations must be
performed on a regular basis.
If these maintenance operations cannot
be performed by the owner, they should
be performed by an authorized STIHL
servicing dealer.
If these operations are not carried out
as specified, the user assumes
responsibility for any damage that may
occur. Among other things, this includes:
–
Corrosion and other consequential
damage resulting from improper
storage.
–
Damage and consequential
damage resulting from the use of
parts other than original STIHL
replacement parts.
–
Damage resulting from
maintenance or repair work not
performed by authorized STIHL
servicing dealers.
Minimize Wear and
Avoid Damage
