9
FC-MM
English
Your FC-MM edger MultiTool is
designed to produce sharp contoured
borders around lawns. It will cut almost
all types of grass, weeds and soft green
plants.
Preparations
If the soil is very dry, spray it with water
before you start work: this softens the
soil a little and also reduces the amount
of dust created. Slightly damp green
plants are easier to cut.
:
Inspect the work area and clear
away any solid objects to reduce the
risk of injury.
:
Plan the the best route for edging.
Operate the MultiEngine with FC-MM
edger in the forwards direction only.
The blade may only be mounted and
operated in one position. Arrows on the
blade indicate the correct direction of
rotation – see "Mounting the MultiTool".
Never work without the deflector!
The deflector is designed to direct
cuttings and other debris away from the
machine and operator.
Using the Edger
481BA000 KN
481BA002 KN
481BA004 KN