28
english / USA
FC 83
A bent or cracked blade must not be
straightened or welded – it may break
completely! Such blades must be
replaced (see chapter “Fitting the
Cutting Blade”). Only use genuine
STIHL cutting blades with part number
4133 713 4101 (marking 33/01).
:
Replace the blade (
1
) when its
length (
A
) is no longer sufficient to
maintain the necessary ground
clearance (
B
) and obtain the
required depth of cut (
C
).
To avoid out-of-balance:
check cutting blade on STIHL
balancer 5910 850 2600.
Do not resharpen the blade!
Replacing the Cutting Blade
245BA027 KN
C
A
B
1
