Stihl BGA 200, Instruction Manual, Page: 7 / 20

6 Adjusting Blower for User
6.1 Adjusting the Nozzle
The nozzle can be set in three different positions
to suit the height and reach of the user. The posi‐
tions are marked on the blower tube.
► Switch off the blower and pull out the connect‐
ing cable plug.
1
2
3
0000-GXX-B488-A0
► Depress the lever (2) and hold it depressed.
► Push nozzle (1) into required position on
blower tube (3).
► Release the lever (2).
Move the nozzle (1) back and forth until the
lever (2) snaps into place.
6.2 Using with STIHL AR L Battery
6.2.1 Adjusting Carrying System to Suit
User’s Height
The carrying system can be set to positions S, M
or L to suit the user’s height.
1
2
2
0000-GXX-A271-A0
► Depress the locking tab (1) and push it in
direction of arrow.
► Remove the slide (2).
S
M
L
4
3
2
2
2
0000-GXX-A272-A1
► Line up mark (3) with mark (4).
► Fit the slide (2).
► Pull the slide (2) up (in opposite direction to
arrow).
The slide (2) engages with a click.
► Set slide (2) to same position on left and right
shoulder straps.
6.2.2 Fitting and Adjusting the Connecting
Cable
The connecting cable can be fitted and adjusted
to suit the user’s height, different cordless prod‐
ucts and the application.
1
2
2
2
2
0000-GXX-A273-A0
The connecting cable can be secured in position
by the guide (1) on the harness and the fasten‐
ers (2), or on the side of the backplate with the
fasteners (2).
3
4
0000-GXX-A274-A0
The length of the connecting cable can be adjus‐
ted by making a loop on the battery (3) or at one
side (4).
► Fit the connecting cable so that has no kinks
and is as short as possible without hindering
your work.
6.2.3 Fitting and Adjusting the Carrying Sys‐
tem
► Put the battery on your back.
1
2
0000-GXX-A275-A0
► Close buckle (2) on the waist belt.
6 Adjusting Blower for User English
0458-812-0121-B 7