BF-KM
English
12
The type and style of the harness,
carrying ring and carabiner (spring hook)
depend on the market.
Shoulder Strap
N
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
Full harness
N
Put on the full harness (1).
N
Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
Attaching Machine to Harness
N
Attach the carabiner (1) to the
carrying ring (2) on the drive tube –
hold the carrying ring steady.
Detaching Machine from Harness
N
Press down the bar on the
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Throwing Off the Machine
WARNING
The machine must be quickly thrown off
in the event of imminent danger.
Practice removing and putting down the
power tool as you would in an
emergency. To avoid damage, do not
throw the power tool to the ground when
practicing.
Practice quickly detaching the power
tool from the carabiner as described
under "Detaching Machine from
Harness".
If you are using a shoulder strap:
Practice slipping the strap off your
shoulder.
If you are using a full harness: Practice
quickly opening the locking plate and
slipping the harness straps off your
shoulders.
Fitting the Harness
1
002BA374 KN
2
1
002BA375 KN
2
1
002BA308 KN
2
1
2
1
002BA310 KN
2
1
2
