Stihl AR 1000, Instruction Manual

Page: 14 / 20

0458-794-9921-C
12
English 11 After Finishing Work
10.2 Connecting battery to a STIHL cordless product
with a battery compartment for STIHL AP
batteries
► Hold connecting cable plug (1) so that the arrow on its side
lines up with the arrow point on the AP adapter’s socket
(2).
► Insert the connecting cable plug (1) in the socket (2) on
the AP adapter (3).
► Push AP adapter (3) into the battery compartment (4).
10.3 Disconnecting the battery
► Switch off the cordless product.
► If you are using a cordless product with a socket: Pull the
connecting cord plug out of the socket.
► If you are using an AP adapter: Take the AP adapter out
of the battery compartment.
11.1 After Finishing Work
► Switch off the cordless product.
► Pull connecting cable plug out of the socket or the AP
adapter.
► If the battery is wet: Allow the battery to dry.
► Clean the battery.
12.1 Connecting and charging USB device
► Pull off the cover (1).
► Pass USB cable’s plug (2) through the opening in the
backplate.
► Insert the plug (2) in the USB port (3).
► Refit the cover (1).
► Press the button (4).
Charging begins.
The USB cable must be removed before starting work.
13.1 Transporting the Battery
► Make sure the battery is in a safe condition.
► Insert AP adapter, with cable connected, in the bag on the
harness.
11 After Finishing Work
3
0000-GXX-2830-A0
3
1
2
12 Connecting and Charging USB Device
13 Transporting
4
1
0000-GXX-2541-A0
3
2