Stihl 4137 Series, Manual, Page: 18 / 58

17 Series 4137 Components - HT
– Remove the shroud,
b
5.1
:
On machines with a guard, take
out the M5x30 screws (arrows).
– Remove the guard (1).
VA
936RA375
1
:
Take out the screws (arrows) – or
only the upper screw on
machines with a guard.
VA
366RA116
:
On machines with one short
circuit wire, remove throttle cable
lug from lower screw (arrow).
– Remove the rewind starter.
Install in the reverse sequence.
936RA430
VA
:
Check that the plug (arrow) in the
rewind starter is correctly seated.
Replace if damaged.
VA
936RA037
:
Fit the rewind starter so that the
lug (1) engages the plug (2).
VA
936RA038
1
2
:
On machines with one short
circuit wire, secure the throttle
cable lug with the lower screw
(arrow).
Install all other parts in the reverse
sequence.
936RA430
VA
6.2 Removing and Installing