The oil in this high-pressure
cleaner is designed to ensure
permanent lubrication of the
machine in normal use and need
not be changed.
If the machine is used in more
demanding conditions or for
commercial purposes, the oil must
be changed every six months.
Oil capacity:
100 ml
Oil grade:
SAE 15 W 40
- Remove shroud
motor / pump unit
if
necessary.
- Lay the motor / pump unit down
so that the screw plug points
upwards.
RE 140 K
•
Release and remove the screw
plug.
- Replace O-ring.
RE 160 K
•
Undo screw plug with 1/4"
(size 7) hexagon socket wrench.
All models
•
Turn motor / pump unit on its
side and let oil drain completely
into a sufficiently large container.
RE 160 K
Note: The pressure compensa-
ting valve should only be removed
if leaking or damaged. Proceed
as follows:
•
Carefully prise relief valve off
with a screwdriver. Do not
damage housing.
- Examine relief valve and replace
if necessary.
•
Replace O-ring (1).
- Grease relief valve before
pressing it into place.
All models
- Fill with 100 ml oil (oil grade as
specified above).
RE 140 K
- Insert and lock screw plug.
RE 160 K
- Turn in screw plug and secure
with a torque of 7 Nm.
All models
Reassemble parts in reverse order.
11.
OIL CHANGE
621RA027 BL
621RA028 BL
621RA114 KN
621RA062 BL
1
621RA029 BL
30
RE 140 K, 160 K
