WORKSHOP MANUAL
Map of functional units
TC 108 SD - TC 118 SD
On reassembling, put the accelerator lever in the «MI-
NIMUM» position, connect the end of the cable (2) to
the terminal (3) on the engine after having mo ved the
cursor (5) in the same «MINIMUM» position specific
to each type of engine and shown in the in struc tion
booklet.
When assembly is completed ...
Refit the dashboard.
Remove the dashboard.
Take off the knob (1) and disconnect the cable (2)
from the connection terminal (3) on the engine.
Undo the two fixing screws (4) and take out the ac ce-
lerator together with the wire.
General informations
Related topics
Removal of the dashboard
REPLACEMENT OF THE ACCELERATOR AND
ADJUSTMENT OF THE CARBURETTOR
CHAPTER
REVISION
FROM ...
PAGE
6.7
1
2018
1 of 1