WORKSHOP MANUAL
Map of functional units
TC 108 SD - TC 118 SD
B) Rear
Position two suitably sized wedges (2) in front of the
front wheels to prevent all uncontrolled movement of
the machine.
Position a jack under the transmission unit and lift it
enough to insert a 170 mm high block (3) under the
lower section of the chassis.
Release the jack and make sure the machine is stable
before starting any work.
DANGER!
The machine must never be lift-
ed using a hoist or other lifting equipment which
uses cables.
A) Front
Once the parking brake has been en ga ged, the ma-
chine can be lifted using a jack which pushes on the
underside of the frame, placing a wood block (1) be-
tween the base of the jack and the frame and check-
ing to see that the free movement of the front spring
equaliser has not been ob structed.
General informations
This chapter covers the main aspects of a servic
ing procedure and the general rules for guaran
teeing a successful service which respects the
safety of the machine.
Related topics
---
LIFTING
CHAPTER
REVISION
FROM ...
PAGE
2.3
0
2018
1 of 1