WORKSHOP MANUAL
MPV 320W / 520W
Chapter
1 - INTRODUCTION
EDITION
2017
PAGE
7 /
64
• Furthermore, this warranty does not apply to:
- Components subject to wear such as blades, belts, wheels, batteries and cables.
- Normal wear and tear due to use.
- Engine and transmission. These components are covered by the warranties of the respective
manufacturers, with terms and conditions specified separately.
The purchaser is covered by national legislation of the Country he resides in. The legal rights of
the laws that refer to the purchaser are not limited by this product warranty.
1.3.4 Service repairs outside warranty
The Service Centre has to make out a report containing the machine serial number, a summary
of the problems, the repairs carried out and any spare parts used for each repair done on the ma-
chine.
A copy of these reports must be retained and made available to the Manufacturer together with
the replaced parts in case of any subsequent disputes with Customers.
1.3.5 Fault notification
The Manufacturer welcomes any notifications of faults that recur with particular frequency. It gives
the opportunity for a careful inspection of the problem and the implementation of corrective action
at production level.
Similarly, the Manufacturer will report any faults discovered on the machines produced, with rec-
ommendations for the most suitable procedures for their remedy.
1.3.6 Spare parts requests
When requesting spare parts, the code number must be given, referring to the exploded charts for
the year of manufacture, shown on the product identification label.
1.3.7 Non-original spare parts
Use original spare parts only. Replacement of any machine component with anything other than
a part authorised by the Manufacturer can adversely affect performance, working life or safety of
this machine and will void the Warranty.
The manufacturer disclaims all liability for any claims or damages, albeit under warranty, property
damage, personal injury or death resulting from the use of unauthorised spare parts.
