Page 22 of 31
TIMERS
MASTER TIMER
SETTINGS
The master timer is a timer that synchronises the slave timers.
Set “slave” instead of “on”: times are related to the master timer (there is still
an option of locally correcting the start and end times per timer).
Time schedule:
•
Have the timer switch on and off based on a
local time schedule
.
•
Have the timer switch on and off based on a pre-programmed time
schedule; enter the time schedule of your choice (1..8) at “Time schedule”.
•
Growth curve (“Growth curves time schedules”) in use: possibility to haven
another schedule activated automatically, depending on the ages of the
animals. “Growth curves time schedules” is followed by the current time
schedule (see also “Time schedules”).
LOCAL TIME SCHEDULE
FIX TIME SCHEDULE
You cannot change the number of
periods, nor the period times,
locally (these settings are copies of
the time schedule number setting).
You can only change the number of
periods and the period times in the
preset time schedule number (in
this example it is “Time schedule
1”).
TIME SCHEDULES
Settings “Growth curves time schedules”.
Note!
If Schedule in the growth curve is set at “no”, the
local time schedule
will
be used. The local time schedule should be filled in as well then: switch off the
curve, fill in the local schedule and switch the curve on again.