Page 10 of 31
MANAGEMENT
ANIMALS
MUTATIONS
Enter changes (or 'mutations') (max. 5 classes of mutations):
•
“Total” column: overview per row, the sum of all mutations (from the last
time that animals were entered in the house until today).
•
Some animals have been removed from the house in the meantime: enter
the number of animals removed next to 'Out'.
•
Some animals were added to the house in the meantime: enter the number
of animals added next to 'In'.
•
“Number at entry”: the number of animals present in the house at the time
when the latest new animals were added.
•
“Animals present”: the current number of animals present in the house.
OVERVIEW
Mutation overview:
•
Call up this week's weekly summary of mutations.
•
Call up last week's weekly summary of mutations.
•
If two animal groups are present: call up the mutations per animal group.
ENTRY DATA
Changing entry data:
●
The mortality table is erased.
●
The entry date is fill-in.
●
The fill ratio is re-calculated (if the fill ratio depends on the entry data)
●
Feed dosing is started (if a feeding cycle is active)
GROWTH CURVE ANIMAL WEIGHT
Display animal weight growth curve:
•
Add breakpoint to the list: touch
•
Remove breakpoint from the list: touch
LOST
Set mutation classes per animal group.
ANIMAL WEIGHING
More information about animal weighing, see: “Application note Animal weighing
PL95IAW-N-ENxxxxx”
xxxxx = version number application note.
FEEDING
More information about feeding, see: “Application note Feed system
PL95IFS-N-ENxxxxx”
xxxxx = version number application note.