MENU: OPERATION
12 | EAC 5
www.stiebel-eltron.com
Holiday program
Operation
The holiday program allows to define a special heat level for a period of absence. The settings
include start of holiday, end of holiday and desired heat level.
The holiday program overrides the active week program, i.e. it puts the running week pro-
gram out of operation. After the period of absence, the week program that was previously in
use is re-activated.
How to set up the holiday function on the controller:
1.
Select
Menu > Operation > Holiday program
.
2.
The Start of holiday screen is displayed.
3.
Press
Chng
and set the desired start point using the
Arrow
key > and the
Plus
and
Minus
keys (+ und -). Press
Save
.
4.
Press
Arrow down
. The End of holiday screen is displayed.
5.
Press
Chng
and set the desired end point using the
Arrow
key > and the
Plus
and
Minus
keys (+ und -). Press
Save
.
6.
Press
Arrow down
. The Heat level holiday screen is displayed.
7.
Press
Chng
and set the desired control mode for the holiday period using the
Plus
and
Minus
keys (+ und -).
8.
Press
Save
.
Now, the holiday function is automatically activated. At the selected start point in
time, the desired operating mode is activated and will be de-activated again at the se-
lected end point in time.