Käyttöohje
User’s manual
4. Installing the wheel balancer
4.1. Opening and inspecting the package
Open the package and check the contents for any damaged parts. If any problems occur, contact the importer.
These basic tools are delivered with the machine:
Rim locking shaft
1 pc
Wheel weight pliers
1 pc
Allen key
1 pc
Rim width interpreter
1 pc
Large quick-locking nut
1 pc
Adapter (cone)
3 pcs
Calibrating weight (100 g)
1 pc
4.2. Installing the machine
The machine must be installed on a stable surface that is at least 60 cm high. There should be 50 cm of free space
around the machine to make it easier to use. Install the machine with three M8 screws.
4.3. Installing the shaft
Install the rim locking shaft to the end of the machine’s shaft with a M10 × 150 bolt (Fig 2).
[31]
Fig 2
