STEYR MOTORS MO114K33, Operation, Maintenance And Warranty Manual

Page: 62 / 134

62
fullload
speedrange
100%
90%
80%
70%
60%
50%
40%
30%
B
C D
RPM
A
OUTPUT
POWER
Technical Data and Overview SE-Engines
MAKE STEYR MOTORS M 16 TCM, TCAM
type
SE-Engines
displacement 3200 cm³
piston displacement 85,0 x 94,0 mm
number of cylinders 6-cylinder in-line engine (position of cyl. 1 at vibration damper side)
ignition order 1 – 5 – 3 – 6 – 2 – 4
sense of rotation, seen from front right
compression ratio 17:1
propped speed range (rpm) refer to chapter 1 – marine engine overview
idle speed 630 rpm (adjustable)
injection Plunger activated, two stage, high pressure with electronically
controlled injection rate
fuel acc. to CEC RF-03-A-84 (DIN EN 590) Cetan >49; diesel fuel No. 2-D,
temperature above –7 °C; No.1-D, temperature below –7 °C
pre- & main fuel filter refer to spare part catalogue
fuel filter location pressure-sided
air filter refer to spare part catalogue
filling capacity motor oil approx. 16,0 l engine housing (incl. approx. 1 l oil filter contents)
specification motor oil SAE 10W-40 ACEA E6/E7 API CI-4/CH-4/CG-4/CF-4,CF
P/No. Z050316-4
oil and oil filter change intervals**) according to service and maintenance schedule
oil filter refer to spare part catalogue
oil filter location pressure-sided
cooling system dual cooling circuit; thermostat-controlled, pressurized cooling circuit;
circulating pump with heat exchanger on engine; governor pump,
external raw water circuit to heat exchange
coolant capacity 13,2 liters
coolant STEYR MOTORS engine coolant –36 °C
P/No. Z011785/0
*) Efficiency of gearbox = 97,0 %, efficiency of Z-Drive = 95,5 %
**) Extended periods to be evaluated upon application and type of usage STEYR MOTORS GmbH.
Reserves the right to make changes without notice or obligations.