manualshive.com logo in svg

Stewart MacDonald 5295, Assembly Instructions Manual

The Draper 5295 is a high-quality and versatile product designed to simplify your everyday tasks. With its comprehensive instructions manual, users can easily navigate through the product's features and functions. Download this manual for free from manualshive.com to enhance your experience and ensure smooth usage of the Draper 5295.

Share
Download
background image

Getting started

Welcome to guitar building!    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Recommended tools and supplies  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Kit parts list  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3

Side Assembly

Assembling the sides   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Making a body mold  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Installing kerfed linings   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6
Squaring the neck block and tailblock   .  .  .  .  .  .  .  .  .  .  .6
Leveling the kerfed linings   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6

Soundboard bracing and fitting 

Installing the soundhole rosette  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .8
Installing the soundboard bracing    .  .  .  .  .  .  .  .  .  .  .  .  .  .8
Bridge and shoulder brace clamping cauls  .  .  .  .  .  .  .9
Fitting the soundboard to the sides   .  .  .  .  .  .  .  .  .  .  .  .  .10
Opening the dovetail joint   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11
Installing the soundboard  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11

Back bracing and fitting 

Installing the back bracing     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .12
Fitting the back to the sides  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .12
Installing the side reinforcing strips    .  .  .  .  .  .  .  .  .  .  .  .  .13
Installing the back   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .13

Routing and binding 

Trimming the top and back overhang   .  .  .  .  .  .  .  .  .  .  .14
Routing for the plastic body bindings   .  .  .  .  .  .  .  .  .  .  .14
Shaping end trim and heel cap  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .16
Installing the end trim   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .16
Installing the bindings   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .16

Peghead shaping and drilling 

Peghead overlay  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .17
Shape the peghead  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .17
Fitting the truss rod  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .18

Making a fretboard 

Trimming the fretboard   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .19
Inlaying the fretboard  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .19
Installing the fretboard side dots   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .20
Installing the frets    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .20
Installing the fretboard    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .21

Neck shaping and fitting 

Shaping the neck   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .22
Fitting the heel cap   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .22
Understanding the neck joint   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .23
The neck heel sets the neck angle   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .23
Fitting the neck to the body  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .23
Neck adjustment: side-to-side    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .24
Neck adjustment: tilt the neck back   .  .  .  .  .  .  .  .  .  .  .  .  .24
Neck adjustment: tilt the neck up    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .25
Tightening the dovetail joint   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .26
Installing the last frets    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .26
Installing the nut    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .26

Finishing 

Introduction to finishing and materials   .  .  .  .  .  .  .  .  .  .27
Sanding the body    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .27
Filling the fret ends   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .28
Sanding the neck   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .28
Spray handles and hangers    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .28
Masking the neck and body  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .28
Staining   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .29
Applying a washcoat to seal the wood    .  .  .  .  .  .  .  .  .  .29
Filling the wood grain pores    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .29
Lacquer spraying schedule  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .29
Sanding and rubbing-out the finish   .  .  .  .  .  .  .  .  .  .  .  .  .30

Final assembly and setup 

Prepare for neck installation    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .31
Install the neck   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .31
Prepare for bridge installation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .31
Installing the bridge   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .32
Fitting the bridge pins .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .32
Fitting the bridge saddle  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .33
Installing the tuning machines .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .33
Seating the strings  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .33
Understanding neck relief    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .34
Nut slotting, saddle adjustment & string action   .  .34
Leveling the frets   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .36
Installing the pickguard  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .36
Installing the endpin  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .36
CONGRATULATIONS!    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .36

Table of contents

Summary of Contents for 5295









































Reviews:

No comments

Related manuals for 5295

Warwick Hotrod Specifications preview
Hotrod
Brand: Warwick Pages: 1
Zon Mosaic4 Specifications preview
Mosaic4
Brand: Zon Pages: 2
Fender David Gilmour Signature Stratocaster Brochure preview
David Gilmour Signature Stratocaster
Brand: Fender Pages: 16
Jackson Adrian Smith San Dimas Dinky Brochure preview
Adrian Smith San Dimas Dinky
Brand: Jackson Pages: 24
Aria 714-STD Owner'S Manual preview
714-STD
Brand: Aria Pages: 6
Fender Telecaster Blackout Wiring Diagram preview
Telecaster Blackout
Brand: Fender Pages: 1
Godin ACS-SA Slim Brochure preview
ACS-SA Slim
Brand: Godin Pages: 20
First Act Discovery FI400 Instruction Manual preview
Discovery FI400
Brand: First Act Pages: 2

Brands by name

Popular brands

Load more brands