stertil SP 2522, Operation Manual

Page: 50 / 176

Operation Manual (Version: B) 6 Type SP
The instructions in this manual do not take into account different national
regulations and laws. When operating the machine, it is the sole responsibility of
the user to make sure that all applicable local laws and regulations are obeyed.
1.3 Guarantee and liability
Please refer to the order confirmation and the delivery terms and conditions for the
applicable guarantee and liability.
1.4 Recommissioning
In the event of a recommissioning (e.g. relocation of the machine or a transfer of
ownership), you MUST contact Stertil and subcontractor to discuss the
procedures, terms and conditions, service contract, etc., so that the proper
functioning and safety of the machine after recommissioning can be guaranteed.
If Stertil is not involved in a recommissioning, then Stertil is not liable for any
claims of third parties arising from that recommissioning.
1.5 Compliance with standards
The dock leveller has been tested, certified and found to comply with:
•
the ‘Machinery directive’ 2006/42/EC.
The control box has been tested, certified and found to comply with:
•
the ‘Low Voltage Directive’ 2006/95/EC,
•
the ‘EMC Directive’ 2004/108/EC.
The product complies with all applicable CE-directives and therefore bears a CE
plate.
1.6 Manufacturers details
If you need any assistance, please contact your regional service center.
If you still have questions after reading this guide, we would encourage you to
contact us. We appreciate all advice, feedback and suggestions from our
customers. Please contact Stertil at: