Operation
Operating instructions (Version F)
39
ST 1082 & ST 1100
5
5.3.3 Operation of one single column
1.
Press <SELECT> until the <SINGLE> light has been activated.
2.
Press button 3 to raise the single column or press button 4 to lower the single
column.
Note
n
An acoustic signal will be emitted when “SINGLE” UP and DOWN is operational
because this is an exceptional situation.
5.4
Operating the pallet lifting mechanism
1.
Set the lever to position (3) and make a pumping movement with the drawbar, to
raise the column lift with the pallet lifting mechanism. The column lift can then be
relocated.
2.
Pull the lever to position (1) to lower the column lift to the floor.
3.
Set the pallet lifting mechanism in the lowest position, and the lever to the neutral
position (2), whenever the column lift is to be used to hoist a vehicle.
Figure 5.2
Pallet lifting mechanism
1
2
3
Lever
Drawbar
