stertil-KONI Freedomlift SK 2055, Installation And Service Manual

Page: 56 / 118

Installation and Service Manual 56 SK 2055 / 2070 / 2090
9.2.3 Waste disposal
Remove and dispose in a correct manner lubricating agents, used chemical
products and other such matter. On this subject, the local environmental
recommendations should be respected. See also Disposal on page 16.
9.2.4 Forms and administration
It is recommended to keep a record for each periodic maintenance procedure
performed on your equipment. The operator/engineer responsible for the
maintenance should enter:
• His or her name.
• The date when the maintenance was carried out.
• The work carried out.
Daily periodic maintenance procedures do not require a signature or date -
these procedures must be completed at the start of each work day.
9.3 Maintenance schedule
The following table gives an overview of all the required maintenance actions
for the operator and service engineer.
The vehicle lift must be inspected thoroughly once a year.
When Action Reference
Daily Operator: Inspection for
visual damage
Visual inspection on
page 59
Weekly Operator: Inspection of
all the functions of the
Freedomlift, even if these
are not used very often.
Monthly Service engineer:
Lubricate guide tracks
Lubrication on page
57
Yearly Service Engineer: Check
for damage in general
and excessive wear
on posts, arms and
hydraulic hoses.
Yearly Service engineer:
Lubricate the hinges with
multi-purpose lubricant.
If necessary, lubricate
more often.
Lubrication on page
57