HEPA Air Scrubber
(HEPAPro AS800)
The HEPAPro AS800 is a compact, portable HEPA Air Scrubber for abatement, resto-
ration, and construction projects. It is commercial, yet lightweight machine that is
easy to carry, transport and store. The unit has a 22” x 24” footprint, stands only 14”
tall and weighs less than 35 lbs.
HEPAPro AS800 offers variable airflow, up to 800 CFM, that can be directed both
vertically or horizontally. It accepts a 16” inlet flex duct and a 10” lay flat outlet duct.
The unit operates at less than two amps of power. It is capable of providing 4 air
changes per hour (the recommended minimum) in a 7500 cubic foot room (more
than a 30’ x 30’x 8’).
This HEPA air scrubber offers a 2-stage filter design including a tested and certified
HEPA filter and pleated pre-filter. An optional carbon/potassium permanganate
filter is available to absorb a wide range of odors and gases.
Warning To Avoid Electric Shock
• Do not expose to standing water or rain.
• Connect to GFCI outlet.
• Do not use an extension cord.
• Unplug fan before servicing or changing filters.
• Do not block air intake or outlet. Allow minimum of 12-inches of distance between obstructions.
• Indoor use only.
• Do not use as stool or bench.
• Do not operate with damaged cord or plug.
Electrical Requirements
HEPAPro AS800 should be plugged into a grounded 15 amp circuit. Unit draws about 2 amps with clean filters and no
ducting. The amp draw will decrease slightly with added ducting and as the filters load with particulate. Due to the pres
-
ence of GFCI receptacle, the HEPAPro AS800 must be plugged directly into a wall outlet. No extension cords should be
used.
