Sterling 360 Page 8 Driver'S And Maintenance Manual Download

Page: 8 / 213

1-4

About your vehicle

Regular maintenance will improve the performance

of your vehicle and extend its service life. It is rec-

ommended that you make a habit of performing the

following inspections.

In this manual, you will find simple maintenance

checks and procedures that can be carried out by

the owner. If you have difficulty, or your vehicle

needs work that is not described in this manual,

please contact an authorized Sterling service facil-

ity.

1 Engine run-in period

To avoid overburdening a new engine, limit engine

speed to 1800 revolutions per minute (rpm) for the

first 600 miles (1000 km).

After this initial run-in period, gradually increase

engine speed, starting with the lower gears.

2 Pretrip inspection

Inspect your vehicle at the start of each working

day. This will ensure continued safe and comfort-

able operation.

P. 11-7

3 Initial maintenance

After you have traveled the first 2500 miles (4000

km), your vehicle needs a free initial maintenance

procedure. When this mileage has been reached,

bring your vehicle to an authorized Sterling dealer

and show them this manual.

At 2500 miles (4000 km), have the dealer do the fol-

lowing:

•

Replace the engine oil, manual transmission oil,

and rear axle oil.

P. 11-17

•

Check and adjust valve lash.

P. 13-4

•

Tighten the wheel nuts.

P. 11-53

•

Tighten the suspension U-bolts.

P. 13-4

4 Maintenance program

Recurring maintenance lengthens the vehicle’s ser-

vice life and can help prevent accidents. Recurring

maintenance can be based on either distance trav-

eled (odometer reading), or length of service (hour-

meter reading).

Maintenance intervals for each recurring item are

shown in the maintenance schedule. Please follow

the maintenance schedule.

P. 14-2

Maintenance

Z11771

Z01367

Summary of Contents for 360






















































































































































































































Search results

Summary of Contents for 360

Reviews:

Related manuals for 360

Brands by name

Popular brands

Sterling 360, Driver'S And Maintenance Manual

Search results

Summary of Contents for 360

Reviews:

Related manuals for 360

Brands by name

Popular brands