manualshive.com logo in svg

Sterling 360, Driver'S And Maintenance Manual, Page: 56 / 213

Share
Download
Sterling 360 Driver'S And Maintenance Manual Download Page 56

5-23

The side rear view mirrors can be moved by hand in

the direction of the arrow.

Swing the mirror inward if the mirror is obstructing

vehicle movement, for example, when turning a

tight corner, passing an oncoming vehicle, or park-

ing in a narrow place.

When the mirrors are covered with frost or mist, turn

ON the switch to heat the mirrors. The mirror heat

 indicator light inside the switch will illuminate

when the switch is in the ON position. Turn OFF the

switch when the mirrors are clear.

CAUTION

Do not use mirror heat when the engine is not

running. This can drain the battery and make it

impossible to start the engine.

Rear view mirrors

WARNING

•

During normal driving, adjust the mirrors

so that a clear view to the rear is available.

•

When turning right or left, use the rear

view mirrors to ensure a safe clearance

behind you.

•

Pay attention to the side rear view mirrors

when driving on narrow roads. Take partic-

ular care to ensure that they do not hit

pedestrians.

•

In rainy weather, water on the mirrors can

reduce visibility to the rear. If necessary,

stop the vehicle and wipe off the water.

If visibility is obstructed for any of these rea-

sons, it could cause an injury accident or

loss of life.

Mirror heat switch 

Z14903a

Z14904

Summary of Contents for 360






















































































































































































































Reviews:

No comments