Sterling 360 Page 168 Driver'S And Maintenance Manual Download

Page: 168 / 213

11-60

Pretrip inspection and maintenance

2. Remove the battery support mounting nuts

(each indicated by an arrow

in the illustra-

tion).

3. Remove the battery support , then remove the

batteries.

6 Installing the batteries

1. Install the battery support and tighten the battery

support mounting nuts.

2. Connect the battery cables. On each battery,

connect the negative (–) terminal last.

3. Make sure the batteries are securely in place

before installing the battery cover or moving the

vehicle.

CAUTION

Make sure the battery is securely installed. If it

is left loose, shocks and vibrations from the

road could damage the battery case and battery

plates, shortening battery life.

To reduce dust and dirt, remove and clean the air fil-

ters in the heating, ventilation, and air conditioning

system (HVAC filters) at regular intervals (every 6

months or so).

Clean the HVAC filters at shorter intervals if your

vehicle is used frequently in dusty areas

CAUTION

Clogged filters may result in inefficient heating

and/or air conditioning, and cause damage to

the blower motor.

1 Outside air filter

Disassembly is required to clean the outside air fil-

ter. Do not attempt to remove this filter yourself.

Bring the vehicle to an authorized Sterling service

facility.

HVAC filter cleaning

Z15058

Summary of Contents for 360






















































































































































































































Search results

Summary of Contents for 360

Reviews:

Related manuals for 360

Brands by name

Popular brands

Sterling 360, Driver'S And Maintenance Manual

Search results

Summary of Contents for 360

Reviews:

Related manuals for 360

Brands by name

Popular brands