Sterling 360 Page 114 Driver'S And Maintenance Manual Download

Page: 114 / 213

11-6

Pretrip inspection and maintenance

3 Lowering the cab

1. Release the lock lever hold-down and secure

it under the clip .

CAUTION

Hold the cab tilt grip when lowering the cab.

Holding lever B or any other part when lowering

the cab could result in damage to the tilt mecha-

nism.

2. Hold the tilt grip to support the cab. Lift the lock

lever and release the cab stay .

3. Still holding the tilt grip , lower the cab until the

hook on the safety release (lever C) engages

with the cab mount .

WARNING

•

Before lowering the cab, make sure that

you have not left flammable objects inside

the engine compartment. This could cause

a fire and result in burn injuries.

•

The cab could drop suddenly, causing a

personal injury, if there are heavy objects

inside, or on the roof deck. Always lower

the cab slowly and provide adequate sup-

port.

•

When you have unlocked the cab stay,

remove your hands from the lock lever. As

the cab stay releases, it tips toward the

rear of the vehicle. A hand, or other body

part could get pinched, and cause an

injury.

Z13283

Z10676

Z10677

Summary of Contents for 360






















































































































































































































Search results

Summary of Contents for 360

Reviews:

Related manuals for 360

Brands by name

Popular brands

Sterling 360, Driver'S And Maintenance Manual

Search results

Summary of Contents for 360

Reviews:

Related manuals for 360

Brands by name

Popular brands