2-1
Unpacking Instructions
Operator Manual
066984
UNPACKING INSTRUCTIONS
2
IMPORTANT:
Report any shipping damage immediately! Inform shipper of any
damages – leave carton intact. Leave the MBC Chair in the receiving area until
inspection is complete.
Your MBC Chair has been carefully packaged at our manufacturing plant to
ensure safe shipment to you medical facility. There are several procedures you
must follow to put your new MBC Chair into service. These procedures only take
a few minutes to complete and are required to ensure proper operation of the
MBC Chair.
Step 1
– Cut the two bands around the shipping carton.
Step 2
– Remove the top half of the carton and cut one side of the bottom half.
Step 3
– Remove the MBC Chair from the carton.
Step 4
– Check to see if all features of the stretcher work properly. If all features
work properly, go to step 5. If any of the features of the Horizon
Stretcher do not work properly, call STERIS for service.
Step 5
– Clean the MBC Chair using a mild detergent to remove any dirt
accumulated during shipment.
Step 6
– Place the stretcher into service.
WARNING – LACERATION
HAZARD: When cutting
bands always use a tool
specifically designed for
that purpose. This will help
to avoid personal injuries
frequently incurred when
bands are cut and tension
released.
