CO
2
EFFICIENT ENDOSCOPIC INSUFFLATOR Operator’s Manual
Page 7
•
If an emergency should arise whereby the need to terminate the procedure is
required, operators should stop the gas flow by turning off the power to the
insufflator and promptly disconnecting the CO
2
Endoscopic Tubing Set at the unit’s
Output Port.
•
The CO
2
EFFICIENT ENDOSCOPIC INSUFFLATOR can release CO
2
to the
surrounding atmosphere in the event of misuse or a fault condition. Use and store the
CO
2
EFFICIENT ENDOSCOPIC INSUFFLATOR in a well-ventilated environment.
Additionally, make sure all CO
2
supply tank connections are correctly installed and
free of visible damage. Should an unexplained rapid discharge of CO
2
occur,
evacuate the immediate area until it has had sufficient time to ventilate.
•
High Pressure USP CO
2
is supplied to the CO
2
EFFICIENT ENDOSCOPIC
INSUFFLATOR from commercially available CO
2
supply tanks. Please read and
carefully follow all Warnings, Cautions and Handling Instructions provided with, and
listed on these CO
2
supply tanks that are used with the CO
2
EFFICIENT
ENDOSCOPIC INSUFFLATOR. Failure to do so can result in Serious Injury or
Death.
•
This product contains phthalates which have been perceived as having possible
carcinogenic, mutagenic and reproductive risks. However, based on all existing
scientific data, the long history of safe use of medical device products containing
phthalates, as well as the short duration of contact with this device, there are no
known cancer or reproductive risks to humans. Physician discretion is required to
ensure that benefits outweigh risks when this device is used in children, elderly and
pregnant women.
4.2 CAUTIONS
•
Do not allow fluids to enter the device.
•
The unit should not be opened except by a qualified service person. Tampering by
unqualified persons can damage the unit and void the warranty.
•
Verify proper connection of tubing before using the unit.
•
This device has not been tested for MR (Magnetic Resonance) compatibility, and
should not be introduced into the MR scanner room.
•
Do
Not
attempt to use this system until you have completed all the steps in
“Assembly Prior to Use” Section 9.0 and “Setting-Up for the Procedure” Section
10.0. If the equipment differs significantly in appearance or operation from the way it
is presented in this manual, or you have any doubts what-so-ever concerning its
installation or operation, inform customer service at 1-800-548-4873.
Summary of Contents for CO2EFFICIENT 710302
Page 2: ......
