7-1
Troubleshooting
Operator Manual
122993-622
TROUBLESHOOTING
IMPORTANT: A listing of the Safety Precautions to be observed when operat-
ing and servicing this equipment can be found in Section 1 of this manual. Do
not operate or service the equipment until you have become familiar with this
information.
This section contains detailed information on the types of washer malfunctions
likely to occur, and possible causes and corrective actions.
If you are unable to correct the problem with use of the following Troubleshoot-
ing Charts, or if a problem occurs that is not described on the charts, please
call STERIS. A factory-trained technician will promptly place your washer in
proper working condition.
NOTE: Never allow unqualified persons to service the washer.
7
WARNING – PERSONAL
INJURY AND/OR EQUIP-
MENT DAMGE HAZARD:
Repairs and adjustments to
this equipment must be
made only by STERIS or
STERIS-trained service per-
sonnel. Nonroutine main-
tenance performed by un-
qualified personnel or in-
stallation of unauthorized
parts could cause personal
injury, result in improper
equipment performance,
void the warranty, or result
in costly damage. Contact
STERIS regarding service
options.
WARNING – ELECTRICAL
SHOCK AND/OR BURN
HAZARD: Disconnect all
utilities to washer before
servicing. Do not service the
washer unless all utilities
have been properly locked
out. Always follow local
electrical safety-related
work practice standards.
WARNING – BURN HAZARD:
•
Before performing any ser-
vice on the unit, wait until
chamber and piping cool to
room temperature.
•
Pipes may be extremely hot.
