SteriFeed S90 Installation And Maintenance Manual Download Page 5 | Manualshive

Page: 5 / 75

SteriFeed S90 Installation And Maintenance Manual Download Page 5

y:\pasteuriser\pasteuriser

manuals

\manuals 2019\s90refcool

manuals\s90installation-maintenance pasteuriser manual 3.12.2019.doc

Date Printed: 03/12/2019

Page No.

5

PASTEURISER UNPACKING INSTRUCTIONS

Unpacking

WARNING: Please make sure the pallet/crate has not been tipped or

dropped.

Check the Tip & Tell label on the side of the box has not filled up with

the blue ink. Check the Drop and Tell label has not been activated.

The chiller is a refrigeration unit and must not be tipped or dropped.

If it has been tipped or dropped do not accept delivery of equipment!

Remove the product from its packaging. Any damage please notify immediately.

Crate should comprise of:

1. S90 Pasteuriser, Two Hoses (Hot and Cold) & 2 Baskets (depending on order)
2. SD Card and reader
3. Spare Probe
4. Thermometer
5. Spirit Level
6. Temperature Warning Poster
7. Hand Over Certificate
8. Electrical Drawings
9. Pasteuriser Manual x 2

Hand over Certificate. Note: The Hand over certificate must be filled out and returned to
Medicare Colgate Ltd, failure to do so may invalidate the warranty.

Important

Do not connect the machine to the electricity supply until all the packing has

been removed. To obtain the best possible performance and trouble free

operation from your machine it is important that you read the Manuals carefully.

Failure to observe these instructions may invalidate your right to free service

during the guarantee period.

«
...
3
4
5
6
7
...
»

Summary of Contents for S90












































































Reviews:

No comments