Conducting the symphony
Fever Pitch is an exciting an unique device, made up of a customized chain of cascading effects modules. Each page of the user interface allows you, the player, to interact with different parts of the pedal to tailor
the sound as you see fit.
The basic structure of the Fever Pitch effect is: Input -> Four Stereo Pitch Shifters -> Reverb / Delay -> Stereo Tremolo / Pan -> Stereo Chorus / Vibrato
Turn the knob to the left of the display to select a new page of controls - the small boxes at the bottom of the display indicate which page you’re currently accessing. The display will then change to show the
various controls available on the current page, as well as their settings.
MAIN PAGE
Sets the volume levels for each of the
four pitch shift voices, as well as the
volume level for the dry / unaffected
input signal.
TUNING PAGE
Sets the pitch tuning for each of the
shift voices. Turn the lower-right knob
to access preset or custom tuning
scales.
PAN PAGE
Sets the stereo panning level for each
of the four pitch shift voices, as well as
the dry signal panning. Pan controls
are disabled if output is set to mono.
reverb PAGE
Sets the parameters for the built-in
reverb effect. Tap the mode knob to
replace the reverb with a delay effect.
mod.fx PAGE
Sets the parameters for the built-in
stereo tremolo / pan and chorus
effects. Turn the lower-right knob to
select the tremolo or pan mode.
misc PAGE
Sets master volume and tone controls,
as well as the ramp rate and ramp
trigger type. The lower-right knob
enables “detuning” for any pitches set
to unison.
INPUT
MONO OR
TRS STEREO
MIX CONTROLS
PAN CONTROLS
OUTPUT MIXER
MOD FX
R OUTPUT
MONO
L OUTPUT
MONO OR
TRS STEREO
INPUT
SWITCHING
SUM
PITCH
SHIFT
A
PITCH
SHIFT
B
PITCH
SHIFT
C
PITCH
SHIFT
D
A MIX
B MIX
C MIX
D MIX
SUM
REVERB
DELAY
MIX TO REVERB
DRY PAN
A PAN
B PAN
C PAN
D PAN
SUM
SUM
VOLUME
VOLUME
TONE
TONE
STEREO
CHORUS
VIBRATO
STEREO
TREMOLO
PAN
DRY MIX
