Before using your new SMD Desolder, read this instruction
manual to avoid any malfunctions.
CAUTION
Toxic product
Do not expose to direct sunlight or heat sources
Use only in well-ventilated areas
Do not eat
Do not breath, solder and fl ux fumes generated
Breathing solder and fl ux fumes may cause respiratory system
irritation or damages
Use a vapor and fume extractor
Keep away from clidren and keep it closed when product is
not in use
Do not mix with other products,
Do not touch with hands.
Wash your hands after their use
•
•
•
•
•
•
•
•
•
•
•
INSTRUCTIONS
Just three easy steps will make SMD Rework as simple as a-b-c!
SMD Desolder is the real solution to rework with SMD chips and any
kind of electronic devices.
Stir clockwise the product with a toothpick, before use.
1.-Put a small amount of SMD desolder
with a toothpick covering all the pins of the
chip to rework, remove or recover.
2.- Apply heat with a soldering iron (25W max)
and melt SMD desolder with the existing
solder.
Then slide soldering iron continuously over
all the pins of the chip. Keeping SMD
desolder and solder in liquid state.
3.- Lift the chip using the tip of a jeweler’s
screwdriver or tweezers. If the chipos hard to
remove, twist the chip to break the glue under
the chip.
Remove residues of SMD Desolder on PCB sliding soldering
iron over solder wick and fl ux. Then clean PCB with isopropyl
alcohol.
Product design and specifi cations are subject to change without
previous notice.
Remove residues of SMD Desolder on PCB sliding soldering
iron over solder wick and fl ux. Then clean PCB with isopropyl
alcohol.
Product design and specifi cations are subject to change without
previous notice.
WARRANTY
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase
ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim
was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling,
leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or
purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center.
Call Center
01 800 500 9000
Product: SMD Desolder
Part number: SMD-DESOLDER
Brand: Steren
