Steren MUL-040, Instruction Manual, Page: 22 / 26

10
CAUTION: If you try to open the cover, make sure the probes are
disconnected to avoid electrical shock.
If the symbol “ ” appears on the LCD
display, the battery must be replaced.
Remove the screws open the battery
compartment and replace them with new
ones.
TROUBLE SOLUTIONS
The multimeter is not
showing a reading.
-Make sure all cables are properly connected
-Verify that the cables are in the correct location.
-Adjust the knob to the correct scale.
-Make sure the multimeter is turned on.
-Change the battery.
BATTERY REPLACEMENT
TROUBLESHOOTING