WARRANTY
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase
ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling,
leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center.
Call Center
01 800 500 9000
Product: 5m LED light strip
Part number: MODLED-200/BCO
Brand: Steren
Before using your new Steren 5m LED light strip, please read this
instruction manual to prevent any damage. Put it away in a safe place
for future referen
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
Product design and specifications are subject to change
without previous notice.
HIGHLIGHTS
HOW TO JOIN STRIPS
The LED light strip has a completely sealed and flexible cover, allowing
installation in different surfaces.
It includes adhesive tape for an easy installation in shop windows, ads and
crystal surfaces, without an additional accessory. It features 300 ultra-bright
LEDs, and 5 metres length.
1.- Use two wires (positive-red and negative-black) to join strips, remove the
plastic protection of each ends.
2.- Weld (with soldering iron and solder) the ends of the two wires into the
signals positive (+) y negative (-) of the strips.
How to weld at a cut location:
When pieces of the strip are cut off, these can still be used independently.
To do so, weld the cables to the
same terminals, and connect them
in the same manner as you would
the rest of the strip.
3 .- Wrap the connection with duct
tape to prevent electric shock
or seal with silicone to withstand
contact with water.
Steren Model
Strips supported
PRL-25
16 Strips
PRL-20
10 Strips
PRL-15
7 Strips
PRL-10
4 Strips
PRL-5
2 Strips
1.- Locate and clean the area where you would
like to place the LED strip.
2.- Take the adequate measurements to
determine what length of strip you will need.
If you need to cut a strip,
be sure to do so along the
line marked. Cuts can be
made every 3 LEDs (5cm).
3.- Remove the protective strip on the
adhesive located underside of the strip,
and place it in the desired location
(plastic, metal, aluminum, glass, wood, etc.).
4.- Choose one of the two power source
options which bests suits your needs (the
LED strip does not include its own power
source).
Option 1.
Connect the positive (red) cable an
negative (black) cable to the corresponding
positive (+) and negative (-) ends of a 12V
power source. For example, a battery.
INSTRUCTIONS
SPECIFICATIONS
Input: 12V - - -
Power consumption: 3.6W
per metre
( + ) RED
( - ) BLACK
Option 2.
Using power sources (not included)
Steren offers products to power the strips correctly in case that you want to
connect multiple strips in serial.
Next table specifies the model of power sources that can help to power up
the strips.
Nominal consumption: 43.2Wh/day
Stand-by power consumption: not
applicable
L9
L9
For a better adhesion, use silicone to secure the strip.
Use this table only like a reference.
