Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
in a safe place for future references.
Before using your new CCTV Camera universal bracket,
please read this instruction manual to prevent any damage.
Put it away in a safe place for future references.
WARRANTY
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or
purchase ticket, product box or package, and product, must be
presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instructions,
improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center.
Call Center
01 800 500 9000
Product: CCTV Camera universal bracket
Part number: CCTV-352
Brand: Steren
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
Product design and specifications are subject to change
without previous notice.
FEATURES
The CCTV universal bracket is perfect to install and adjust the camera in
almost any direction, due to its mechanism and design.
The package includes three wooden pegs and three screws to fix the
camera to the wall.
INSTRUCTIONS
• Use the mounting plate as a pattern to follow and mark the locations of the
holes to make.
• Drill into the surface.
• Insert a wooden peg into each hole.
• Secure plate with screws.
• Set the camera on the screw and tighten firmly.
• Use screws to adjust the camera to the desired angle.
