Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
Before using your new Visitor chime with movement, read the
following recommendations.
IMPORTANT
When the batteries are poor, the chime may
activates constantly. Replace the batteries
with new ones.
The equipment must be placed in a stable
surface.
Do not place it where exist objects in
constantly movement.
When the battery is low, sensitivity and time
Recovery may vary.
If Ding-dong decreases replace the batteries.
Clean only with a soft, dry cloth.
Do no try to open the equipment, may cause malfunction and
warranty repeal.
Do not expose to extreme temperatures or direct sunlight.
Do not use or store the equipment near wet places. May
cause malfunction or shock hazard.
Check the battery regularly.
When the equipment is not to be used for a long time, remove
the batteries.
FEATURES
Wireless and compact, your new Visitor Chime can be easily
installed on the wall, using its hanging hole.
Its built-in sensor operates up to a range of 7 meters (in
normal light conditions), sending a clearly audible signal when
somebody passes thru the sensor-covered area. Is one of the
most reliable and convenient alert systems to announce entry
or exit from a monitored area.
CONTROLS
1.- Movement sensor.
Detects when somebody passes
thru the sensor-covered area.
2.- Off - Volume.
Turn off the chime / set the
volume level (Hi or Low)
•
•
•
•
•
•
•
•
•
•
•
•
•
3.- Power supply.
External power supply.
4.- LED indicator
5.- Batteries compartment.
6.- Slot mounting.
HOW TO USE THE VISITOR CHIME
Before to start to use the device, make sure that you have
installed 4 new batteries type AA or with enough charge (batteries
not included)
At the same way, you can use the visitor chime with an AC power
adapte
To start to use the visitor chime, follow these steps:
1.- Place the equipment near to the doors, parallel to the main
entry.
2.- Move down the switch, you have two volume options: Low and
Hi.
3.- When somebody passes thru the sensor-covered area
automatically sends a clearly audible signal, warning about their
presence.
4.- To turn the chime off, momentarily, move away from the
sensor-covered area (more than 7 meters). If you want to turn the
chime off permanently, move the switch to Off.
SPECIFICATIONS
Maximum detection range: 5 to 7 meters
(in normal light conditions)
Input: 6 V - - -
Speaker output: 0,5W 95dB
AC power adaptor
(not included)
Input: 120 V ~ 60Hz 6W
Output: 6 V - - - 300mA (negative center)
Dimensions: 120 x 70 x 50mm
Weight: 165g (without batteries)
Product design and specifications are subject to change
without previous notice.
ENGLISH
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
5
6
1
2
3
4
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
in a safe place for future references.
