®
4 Preparing for operation
©
F. Stephan GmbH
GA-602-0106V1.0-PAE-GB
19
4
Preparing for operation
4.1
Erecting the device
S
TAXEL
3.5
is supplied on rollers.
The front rollers of the device are equipped with parking brakes to
prevent any unintended movement of
S
TAXEL
3.5
.
Press lightly on the brake lever to activate the parking brake by blocking
the rollers. Lift the brake lever with the tip of your foot to release the
parking brake again.
When moving the device, ensure that the wheel brakes have been
released and are applied again when set upright.
S
TAXEL
3.5
must only be erected and operated in dry, well-ventilated
rooms with low dust levels. Moist or wet environments can drastically
impair the functioning of the device. Ensure in particular that there are no
containers filled with water or similar in the immediate vicinity.
When choosing the site for erecting the device, make sure there is easy
access for operation, cleaning and maintenance.
The ambient temperature should never 40° C. For relative
humidity levels exceeding 70%, it is advisable to operate the device only
in air-conditioned rooms.
The air intake grids on the back of the device must not be covered or any
objects placed on them.
There should be spacing of at least 10 cm to the wall at the rear of the
device.
S
TAXEL
3.5 with rollers
Caution
Information
