manualshive.com logo in svg

Stephan STAXEL 3,5, Operating Manual, Page: 12 / 42

Share
Download
Stephan STAXEL 3,5 Operating Manual Download Page 12

2     Safety instructions 

 

12 GA-602-0106V1.0-PAE-GB 

©

 F. Stephan GmbH

 

 

S

TAXEL 

3.5

 must not be operated in the vicinity of naked flames or 

glowing objects, given the increased explosion risk from the 
concentration of pure oxygen in the device. 

 
 

The device must not be used when damaged. Disconnect from the mains. 

 

 

 

Always disconnect the device from the mains immediately in any 
dangerous situations or when technical faults occur. 

 

 

2.2 Warnings 

 

 

When moving the device, ensure that the wheel brakes have been 
released and are applied again when set upright. 

 
 

DIN EN 60601-1 resp. VDEO 0751-1 must be heeded in particular for 
medical technical devices with electrical connection. Accordingly, these 
devices must only be repaired by the manufacturer or an entity explicitly 
authorized for this purpose by the manufacturer. 

 
 

The provisions of DIN EN 60601-1 must be heeded when connecting 
external electrical devices. 

 
 

Only the authorized customer service of F. S

TEPHAN 

G

MB

H is allowed to 

alter, modify, repair or open the device. This also includes replacing the 
bacteria filter, intake filter and intake filter mat in accordance with the 
operating manual. Use only spare parts from F. S

TEPHAN 

G

MB

H for 

maintenance. 

 

 

Danger

Danger

Danger

Warning

Warning

Warning

Warning

Summary of Contents for STAXEL 3,5











































Reviews:

No comments