manualshive.com logo in svg

Stephan EVETR, Instructions For Use Manual, Page: 34 / 254

Share
Download
Stephan EVETR Instructions For Use Manual Download Page 34

2     Safety instructions 

 

34 

GA-070T-0518V2.7-HAO-EN 

 Fritz Stephan GmbH 

 

2.1

 

Danger 

 

 

DANGER 

 

The device must only be operated by authorized and properly trained professional 
staff. The device must be operated according to the instructions in this operating 
manual. 

 

 

DANGER

 

 

The device is not certified for use in potentially explosive environments! 

 

 

DANGER

 

 

The device must not be used in areas with contaminated air. 

 

 

DANGER

 

 

Risk of explosion! 
Do not use any combustible or anesthetic gases. 

 

 

DANGER

 

 

Use of the device in the vicinity of magnetic resonance imaging systems may degrade 
its functionality, which can potentially put the patient and operator at risk. 

 

 

 

Summary of Contents for EVETR































































































































































































































































Reviews:

No comments