Starting
10
Figure 3.
Keypad
1. ON/OFF
2. MODE
3. OK
4. SELECT
3.1.1. Key ON/OFF
Briefly press ON/OFF for switching the instrument on and off. Display
shows the device type, version and manufacturer's address.
Measurement mode starts automatically depending on the connected
sensors.
The device is switched off by pressing ON/OFF, automatically after 4
minutes in TIMER OPERATION or after reduction of the battery voltage
to 1 %.
3.1.2. Key MODE
With MODE it is possible to upload different instrument setting and
adjustment functions, depending on the connected sensors. Each
function must be confirmed with OK.
MODE
CONTI
By CONTINUAL OPERATION, the status line
shows CONTI and the device remains switched
on. After re-starting the TIMED OPERATION is
active.
TIMER
By TIMED OPERATION, the status line shows
TIMER and the unit will be switched off after
approx. 4 minutes automatically.
CALIBRATION
The calibration procedure starts
DISPLAY
CONTRAST
Change of the contrast
(00025
─00050). Factory setting: 30
1
2
3
4
