30
5.7
Underwater camera
−
Connect everything else before connecting to 230 V.
−
Disconnect power supply before disassembly.
−
Inspect for any damage on the metal hoop on the camera before submerging the
camera
−
When the camera contact is disconnected from the rest: remove all sand and growth
with isopropyl alcohol and apply Molykote before reassembly.
−
Tie the camera rope from the Multiwinch to the hoop on the underwater camera.
−
Apply a thin layer Molykote 44 (approx. 1/10 of the depth of the contact, approx. 1 mm).
−
Attach the camera cable to the camera.
−
Ensure that the camera is hanging correctly; the rope should keep the plug in the right
position.
Figure 18 Camera contact, metal hoop on
camera and camera rope
Summary of Contents for Orbit-200
Page 34: ...34 Figure 22 Gamepad Figure 23 Gamepad backside ...
Page 46: ...46 ...
