Steinmeyer FMC200, Operating Manual

Page: 69 / 128

Steinmeyer Mechatronik 1 General Information
Operating manual FMC200 controller
E-3
1.5 Repair
Repair work on the FMC controller may only be carried out by techni-
cians of Steinmeyer Mechatronik GmbH. Returns for repair require an
RMA number (see “Returns” starting from page 2).
Steinmeyer Mechatronik GmbH is not responsible for damage or con-
sequential damage caused by any data loss during the repair (param-
eter setting). A data backup has to be taken before returning the FMC
controller.
1.6 FTP server
You will be given a customer login for our webspace (FTP server) for
retrieving product-specific data. Product specific data include control-
ler software, parameter files, and product documentation.
You can access our FTP server at any time and download data as often
as desired.
1.7 Customer Service
In case the information is not available or if your have questions,
please ask for technical support from Steinmeyer Mechatronik GmbH:
Steinmeyer Mechatronik GmbH
Fritz-Schreiter-Str. 32
01259 Dresden
Tel.: +49 (0)351 / 88585-0
support@steinmeyer-mechatronik.de
www.steinmeyer-mechatronik.de